Printing some booklets (A4 on SRA3) on a Ricoh C5300, finishing done on the SR5120 inline booklet maker.
First few copies there is very light fading on the bottom edge. By the 25th copy it becomes a lot more pronounced.
See the photo below. Bottom is the 5th copy, top is the 25th. Any ideas on why this is happening?
First few copies there is very light fading on the bottom edge. By the 25th copy it becomes a lot more pronounced.
See the photo below. Bottom is the 5th copy, top is the 25th. Any ideas on why this is happening?
