Fujifilm FLP-1260 Plate Processor Water Won't Turn Off Problem

[KPS]

We have a Fujifilm FLP 1260 Plate Processor and when it does a replenishing cycle I notice the water isn't turning off where the spray bars are in the finishing station. Has anyone else had this problem and can tell me how to fix it? Thanks.

 

[sveibl]

Facing the plate delivery, open door/panel on lefthand side. there are solenoids that control water on/off in lower right.

We had them fail regularly and kept extras on hand.

I believe there are 2. If in doubt, swap connections and between the 2 to see if spray stops using other solenoid

 

[KPS]

Facing the plate delivery, open door/panel on lefthand side. there are solenoids that control water on/off in lower right.

We had them fail regularly and kept extras on hand.

I believe there are 2. If in doubt, swap connections and between the 2 to see if spray stops using other solenoid

Thank You so much. I knew we had replaced one of the solenoids about a year or so ago and didn't even think to look at that.