Hotfoil issue

[Moutamix]

Hello, pls i have a pneumatic heat press to make hotfoil stamping
I have a problem when i work with large plate, some place dont stamp, pls what can be the problem ?

 

[pdan]

You need to "makeready" the areas not imaging/foiling.
Assuming your are using a phenolic board place some thin packing (plate tissue or packing about .002") under the phenolic in the necessary area(s).
Add more as needed.

 

[Moutamix]

You need to "makeready" the areas not imaging/foiling.
Assuming your are using a phenolic board place some thin packing (plate tissue or packing about .002") under the phenolic in the necessary area(s).
Add more as needed.

Thank you for your answer, i can’t find makeready sheet in my country , i tried by a tape but the result not good i will try with very thin sheet

 

[pdan]

Thin sheets. As many as it takes.

 

[Moutamix]

Thank you i solved the problem by tissue paper and increase temperature
Thank you for your help