Interface Not Supported Prinergy Evo 3.x

[Asim Khalil]

Hi Friends,

I am installing the Windows server 2003 on Dell Power Edge 840. My CtP machine is Creo Trendsetter 800 II. I am encountering the issue that is as soon as I insatlled the Prinergy Evo after installation without error while I restart or logoff I encounter Inerface Not Supported. I tried my luck in many ways but unable to solve it. Any idea or help will be highly favorable.

Thanks

Asim

 

[Zerge]

Prinergy Evo

Hi!
Can't see PE840 and Server 2003 in supported HW and OS even for Evo 6.x and 8.x. You don't have to worry about the older 3.x...
The absence of errors during installation does not imply correct performance, heh.
Look here: Workflow Documentation - Documentation - Kodak Workflow Documentation
As an inelegant way — you can install a virtual machine with supported OS and have a try.

 

[ssutton503]

I think we run similar computers and have a Trendsetter News as a platesetter. If what you are trying to do is replace an existing 840 (or create a backup computer) what you might try is cloning the existing computer's hard drive. Then you can try using the clone on the new 840. I have used Macrium Reflect for just such a reason.

I might also add that when our system was installed, Kodak made a Ghost image for restorations.