Konica Minolta 1060 setup

[willvp2408]

Hello, was wondering if anybody has the Konica Minolta 1060 setup with a 100 page booklet finisher with joggers, and the 3 drawer air feed paper trays? How has it performed?

Thanks!

 

[willvp2408]

Beuller............Beuller........................as Pink Floyd would say...Is there anybody out there?

 

[Baldbug]

Hello, was wondering if anybody has the Konica Minolta 1060 setup with a 100 page booklet finisher with joggers, and the 3 drawer air feed paper trays? How has it performed?

Thanks!

We have the same 3 drawer air feed trays on our C1085 and they good. Great stock pickup from 70gsm to 350gsm. Using tray 1 we have Air Assist on manual so we adjust the air pressure for lighter stocks and smaller sheet sizes. We have an 80 page Booklet finisher which gives no probs and a little Plockmatic 104 Square Edge finisher at the delivery were the finished booklets come off the printer. We've done 10,000+/– booklets with no probs.

 

[willvp2408]

Thanks for the reply. Good to know about the 3 drawer.

 

[JDLR]

We have the same 3 drawer air feed trays on our C1085 and they good. Great stock pickup from 70gsm to 350gsm. Using tray 1 we have Air Assist on manual so we adjust the air pressure for lighter stocks and smaller sheet sizes. We have an 80 page Booklet finisher which gives no probs and a little Plockmatic 104 Square Edge finisher at the delivery were the finished booklets come off the printer. We've done 10,000+/– booklets with no probs.

How would you rate the reliability of your KM 1060 regarding: jams, color, overall performance, how many clicks do far???

 

[halmac]

We have a C1060L and we have a regular finisher and the regular LCT. If I was doing it again I would get the finisher you speak of with the decurler and the 3 drawer airfeed trays. We LOVE the quality. It is very reliable. Make sure the densitometer comes with it. It's easy to use and Keeps the color constant. Our machine rarely jams up inside. It is usually the feeder on the bypass tray that causes the problems. The bypass tray is not standard. It has to be ordered extra.

 

[willvp2408]

Still looking at units. So far have looked at the KM 1060 and now the Ricoh 5100. The KM unit looks alot beefer than the Ricoh box. I have a km6000 now and it has been very reliable. Only complaints have been registration and banding. The new 1060 addresses both of those issues from what I saw. The Ricoh box prints good just has that plastic feels to it compared to the KM. Right now I am leaning way towards the 1060. Right now I have over 5 million clicks on my 6000.

 

[msaeger]

Still looking at units. So far have looked at the KM 1060 and now the Ricoh 5100. The KM unit looks alot beefer than the Ricoh box. I have a km6000 now and it has been very reliable. Only complaints have been registration and banding. The new 1060 addresses both of those issues from what I saw. The Ricoh box prints good just has that plastic feels to it compared to the KM. Right now I am leaning way towards the 1060. Right now I have over 5 million clicks on my 6000.

Have you gotten a price on a 7110?

 

[willvp2408]

Yes I did. It was almost double per month on a lease price compared to the KM. They even tried to sell me a 651ex used at a crazy price.