Magnus 400 lll communication problem
- Thread starter captnkirk
- Start date
First, obvious check is that the Magnus is powered on (main power and yellow buttons)
You should have 2 ethernet cables in the back on the PC
One should go to your network switch, the other should go direct to the Magnus
Check that cables are connected both at the back of the PC and in the Magnus.
Check the network settings in Windows, there may be 4 network connections, the one you want is called GMCE Master Connection
Check that this does not have a red X on it, if it does, there is a either a physical or settings problem with that network connection.
Open the connection and check the TCP-IP settings, should look something like this:
You should have 2 ethernet cables in the back on the PC
One should go to your network switch, the other should go direct to the Magnus
Check that cables are connected both at the back of the PC and in the Magnus.
Check the network settings in Windows, there may be 4 network connections, the one you want is called GMCE Master Connection
Check that this does not have a red X on it, if it does, there is a either a physical or settings problem with that network connection.
Open the connection and check the TCP-IP settings, should look something like this:
Similar threads
PressWise
|
A 30-day Fix for Managed Chaos
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line. “We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month. Learn how……. |
