atlanticcolor
New member
I am hoping another Atrworks user out there will be able to help me with this. My company recently added presses that require CIP3 data, so while I am new to CIP3 I have been using Nexus for a few years now.
What I have done is modify a “basic” output WF to generate the CIP3 files. After sending the sample files off to my press vendor they asked me to make changes to the info that Nexus generates.
Here’s where I am having a problem, the vendor asked me to change the /CIP3AdmSheetName and I believe I found the control for that in Nexus’ “generate CIP3 module”. However none of the input I enter into that template gets sent out with the CIP3 file. At the same time I _AM_ able to make changes to the /CIP3AdmJobName which is controlled in the same module. Am I missing some other control for this action?
-Bill
What I have done is modify a “basic” output WF to generate the CIP3 files. After sending the sample files off to my press vendor they asked me to make changes to the info that Nexus generates.
Here’s where I am having a problem, the vendor asked me to change the /CIP3AdmSheetName and I believe I found the control for that in Nexus’ “generate CIP3 module”. However none of the input I enter into that template gets sent out with the CIP3 file. At the same time I _AM_ able to make changes to the /CIP3AdmJobName which is controlled in the same module. Am I missing some other control for this action?
-Bill