polar 92 EMC/EM MONITOR problem

[Didos]

HI,
Anyone can help me on polar 92 EMC MONITOR problem?
When I suitch it on every thing is ok but when the command buttons for cut
are pressed the knife dosn't go down to cut and it displays on the screen the following
message:TIME OUT ERROR KNIFE
What is the meaning of this message?and how to remove it?
Thanks in advance.

 

[NGA]

not sure where your located, but here is a number to the best polar cuter mechanic i've seen out there. He will probably help you troubleshoot over the phone.

Larry -1-240-675-1598

He is ex heidelberg

I'm on the east cost in PA.

 

[MARTIN MOSCA]

Time-out error knife polar 92

Time-out error knife polar 92

I´m having the same problem with my polar 92, can you tell me how do you fix it. Same same problem. Sorry my bad english, i´m in south america uruguay

hi,
anyone can help me on polar 92 emc monitor problem?
When i suitch it on every thing is ok but when the command buttons for cut
are pressed the knife dosn't go down to cut and it displays on the screen the following
message:time out error knife
what is the meaning of this message?and how to remove it?
Thanks in advance.

 

[natheeralkabi]

dose clamp go down during pressing kinfe buttons ,if its check the safty bolt solinoed
for any mechinecal stafness.

 

[quadraernie]

i have DYF
reach me
[email protected]
quadraernie