David Ingram
Active member
Hello, Our prinergy system for some reason, does not image center marks on work & tumbles, this is causing a lot of grief in the pressroom, Marks sho in press template and virtual proof but do not image, has anyone experienced and or resolved this problem?
Prinergy Version is 4.062 Preps is 5.3.5. build 595, Ironically the marks show on work and turn forms where they are not needed as critically. TIA for any help!
Prinergy Version is 4.062 Preps is 5.3.5. build 595, Ironically the marks show on work and turn forms where they are not needed as critically. TIA for any help!