P
pam_add
Guest
we have agfa avantra 44s and we drive it by print drive series 3 version 1 update c , recently this problem appear when we are using narrow media like 75cm or smaller all things is ok yestrday we use 36 inch or 91.4cm width and after we define the media in printdrive in semi automatic mode and assign it to avantra we can not image anything on this media .
in the media menu we see grey light icon beside the 36 inch media .
grey light is meaning as in reference card
Not Available or Non-Urgent Mismatch
Media is loaded on the output device but PrintDrive
cannot access the media without user intervention.
OR
This media is not assigned to this device. Use the
PrintDrive Device Properties dialog to assign the media to
the device.
anyone have like this status ... any sugeest you are welcome
in the media menu we see grey light icon beside the 36 inch media .
grey light is meaning as in reference card
Not Available or Non-Urgent Mismatch
Media is loaded on the output device but PrintDrive
cannot access the media without user intervention.
OR
This media is not assigned to this device. Use the
PrintDrive Device Properties dialog to assign the media to
the device.
anyone have like this status ... any sugeest you are welcome