Rubber roller Nip width

[faisal.ta]

Hi

For the rubber roller what is the formula which we can use to determine the nip strip width?
We have rollers with different diameter. SO on the basis of diameter what formula can be applied?

 

[Cornishpastythighs]

Some info
Printing Press Rollers | Press Roller Products | Replacement Rollers | Böttcher Systems

A simple formula for calculating the stripe necessary for a roller would be to multiply the diameter of the roller by 1/16 of an inch. Dont forget to check roller durometers as this can influence the stripe/pressure especially on the ink form rollers