Scitex Dolev 800

[[email protected]]

Does anyone have a Scitex Dolev 800 that is still running?

 

[BarbWPP]

Define running. Our's hard drive went out, and we lost the specs, but everything else still worked/works fine. Been just sitting there for a couple of years, though. Just don't really know how to set it back up, and wouldn't use it enough to warrant paying someone to do it. Same for the Brisque/RS6000, except drives were still good. So, we can't actually use it now, ourselves, but with some know-how, perhaps someone else could.

 

[tomcatinc]

Does anyone have a Scitex Dolev 800 that is still running?

I work on Dolev 800V with PSM on daily basis. There is still pretty much use of film here.

 

[[email protected]]

Tomcatinc

Could you provide output services for our company?
We would like to output 1 bit tiffs to film on a Dolev800V

 

[JRumley]

Hello, My name is Jerry and I currently have 2 running Scitex Dolev 800's for sale. If you arte interested you may contact me direct at 336-312-2409. Yes they are running.
thanks,
Jerry

 

[RichardE]

Dolev 800V for sale Also, Brisque 4.1

Dolev 800V for sale Also, Brisque 4.1

Does anyone have a Scitex Dolev 800 that is still running?

Are you still looking for a Dolev 800V? We have a working (well) Dolev 800V. Located in Wisconsin.

 

[thedarkpose]

Do you still have Dolev 800V?

 

[Hexio]

Does anyone know of any Scitex / Creo engineers still working in the UK (London area)?
We have an old Dolev 800 v with a spinner issue.
We have had the spinner reconditioned by an engineer who by his own admission is not familiar with Scitex, but was able to deduce that the spinner cannot locate its origin point, meaning that images are starting in the wrong position on the film. They are also coming out blurry, which we believe is connected to the same issue (as the two problems started at the same time).

Could anyone point us in the right direction?

Thanks