• Best Wishes to all for a Wonderful, Joyous & Beautiful Holiday Season, and a Joyful New Year!

Soft Touch (feel) Aqueous Coating

soft touch lamination

soft touch lamination

I'm looking for some information and pointers running soft touch aqueous coating. I've ran several press test that have all been successful, however problems ensue during longer production runs. The viscosity on this stuff is around 50 seconds through a #2 zahn, yeah it's like glue. I'm running it using a Harris & Bruno anolix coating unit with a 200 line 8.6 bcm anolix roll. The major issue that I'm having seems to be foaming. I believe that the coating is being agitated from the anilox roll and then not getting into the cells thus causing voids. The voids alway show up on the gear side, opposite the fill side of the chamber. Any help would be appreciated!

Edited by: Tim K. on Jul 13, 2008 10:21 PM

i have use coating but we are not happy with the results of coating, we have seen samples of soft touch lamination that have more valvet effect then coating, we are searching the supplier for the same if anybody know about soft touch lamination please provide me.
 
i have use coating but we are not happy with the results of coating, we have seen samples of soft touch lamination that have more valvet effect then coating, we are searching the supplier for the same if anybody know about soft touch lamination please provide me.
 

InSoft Automation

InSoft Automation Unveils Imp Version 14

Revolutionizing Layout Planning and Automation

InSoft Automation announces the launch of Imp Version 14, the latest iteration of its industry-leading cost-based layout planning software. Packed with cutting-edge features, this release redefines efficiency, automation, and workflow optimization for printing and finishing processes.


Learn more…….

   
Back
Top