buckeyewta
Well-known member
We installed a Versant 80 yesterday. I was an upgrade from a C75 that we put 1.2M on in just over a year. Couple things I noticed after running half a day.
Jobs seem to process faster than the C75 but the machine seems to take a little longer to warm up and start printing.
The Fiery does not seem to be much faster than the C75. It still takes 2 minutes to start up.
Prints are a lot less glossy than the C75.
The 80 seems to use more toner. We are already completely out of toner and waiting on supplies to be shipped.
The 80 seems to run much quieter than the 75.
It takes forever for the machine to shut down completely. (up to 30 minutes)
Alignment profiles are much easier to set up than the 75.
We ran over 7500 sheets with no jams.
High cap feeders are now set up so customer can change feed tires etc.
Jobs seem to process faster than the C75 but the machine seems to take a little longer to warm up and start printing.
The Fiery does not seem to be much faster than the C75. It still takes 2 minutes to start up.
Prints are a lot less glossy than the C75.
The 80 seems to use more toner. We are already completely out of toner and waiting on supplies to be shipped.
The 80 seems to run much quieter than the 75.
It takes forever for the machine to shut down completely. (up to 30 minutes)
Alignment profiles are much easier to set up than the 75.
We ran over 7500 sheets with no jams.
High cap feeders are now set up so customer can change feed tires etc.