I am running a DC5000AP / Creo CX50 RIP ( 110,000 Clicks ) and we are starting to get intermittent sheets out of register across the sheet ( Short Scan? ).
We mostly run 300gsm SRA3 board and dress all sides of our stock prior to printing and have very few jams.
It's probably 1 every 100 - 200 sheets, and is more common in All Stocks Mode.
Xerox Techs have been very helpful but are saying that they have never seen this before ( the first catch cry of a tech ) and have completely replaced the Imaging Belt unit, sensors and all and it is still out intermittently.
I initialy thought it was mechanical, but it could be the RIP. (Seems more common on complicated files?)
Has anyone with a DC 5, 7, or 8 seen this problem?
We mostly run 300gsm SRA3 board and dress all sides of our stock prior to printing and have very few jams.
It's probably 1 every 100 - 200 sheets, and is more common in All Stocks Mode.
Xerox Techs have been very helpful but are saying that they have never seen this before ( the first catch cry of a tech ) and have completely replaced the Imaging Belt unit, sensors and all and it is still out intermittently.
I initialy thought it was mechanical, but it could be the RIP. (Seems more common on complicated files?)
Has anyone with a DC 5, 7, or 8 seen this problem?