Recent content by exify

What software does everyone use? I'm looking into a solution for my current shop. I've used PowerQuote at another shop, but wanted to get suggestions for what else is out there. Thanks.

I am also in NY with a 6500 with 3 mil clicks on it... did you upgrade current lease or add a 2nd machine? If you upgraded, how much extra was it if you don't mind me asking.

ive gotten it with flipped blades, bad drum motors and assorted stuff like that try swapping the drums around to see if one is bad. i think i also got it once where the developer was bad but it was coding the drum

it's partnerprinting.com's w2p.

we have exactly the same thing here, it sucks. it's not redtag though, redtag is one website for every printer and they just get a commission

Konica seems understaffed. In our area, there are only 2 color techs and they are constantly swamped and overworked.

I somewhat fixed it by setting second transfer to low and making separation DC -30. It still wasn't completely gone, so I put separation AC on -15 or so (I think offhand). Still there but alot less noticeable. The paper was cut for us to 13x19 from 24x40, so the grain is probably long. Can't...

How can I fix this? The techs solution was changing the registration loop to -85, which fixed it for a little. Now it's back as bad as ever. It happens between the 3-5 inch from trail edge area. (using 13x19 12pt. carolina).

Nope, scaling set to 100%.

I noticed that when I impose using Quite Imposing my image shrinks a little in one direction. I thought it was my copier but it happens on multiple machines. For example, 8.5 x 11 2 up on 12x18 will become either 8.45x11 or 8.5x10.95. Very rarely it will be 8.45x10.95. Happens on KM 6500, Canon...

This happens to us all the time. Techs can't seem to fix it 100% of the time, only sometimes. It also skews like hell, but they can't fix that either. I have to skew the paper in my cutter to make it cut straight. Yesterday I had a job shift 5 of 25 sheets down .25 inches. :rolleyes:

Anyway you can post all the speeds it mentions up?

So what you want is a like binder with all the templates in it? So customers can browse? I don't know of any that sell that, but you could make one yourself.

Any other thoughts on it? I'm also looking into this machine.

What's the lead margin on a 13x19?