Avantra 30 OLP

[LUIS AVILA]

I have problems with the bridge of my AV30, because the film goes to fast to the processor and sometimes the film jam just betewn the bridge and processor input and every time the film practically hits with the first rollers of processor input. I tried to use a AVDIAG to control the speed or get the low speed of high rollers of bridge but nothing change.

 

[VladCanada]

The Bridge Output reflective sensor is the root of your problem (or even worse - bridge PCB): when the head of piece of film reaches that Sensor, the Bridge has to slow down and to feed the film with approx the same speed as a Processor speed.