adarfeen
Active member
Dear guys,
We are facing the BLANK screen issue on our SS5000, the scenario is as below;
"We are imaging our jobs normally and suddenly the RIP and Machine hang up we restart the imagesetter and the RIP but the imagesetter OCP is blank while the status LEDs on the motherboard (qty:08) are all on means stable and nothing happens i.e. machine did not boot, the only message we see on OCP for the seconds is : " OCP firmware revision........" and then blank screen."
Please help resolving this issue.
Special request to Vlad to help for this.
Best regards
adarfeen
We are facing the BLANK screen issue on our SS5000, the scenario is as below;
"We are imaging our jobs normally and suddenly the RIP and Machine hang up we restart the imagesetter and the RIP but the imagesetter OCP is blank while the status LEDs on the motherboard (qty:08) are all on means stable and nothing happens i.e. machine did not boot, the only message we see on OCP for the seconds is : " OCP firmware revision........" and then blank screen."
Please help resolving this issue.
Special request to Vlad to help for this.
Best regards
adarfeen