colour loss during printing

[tarai]

wht would be the cause of images losing its colour while printng. The ratio used is 1:4 and processing time for a plate set by the Fusji technicians is 10-12mins. This processor is AGFA converted to Fuji chemicals

 

[Raymond Ramirez]

Did you find your answwer?
also please let us know what plate and imaging device

 

[danremaley]

loss of color

loss of color

wht would be the cause of images losing its colour while printng. The ratio used is 1:4 and processing time for a plate set by the Fusji technicians is 10-12mins. This processor is AGFA converted to Fuji chemicals

Loss of color could be a sharpening of the dot structure. I place a 2% dot in the color bar for 3 reasons. 1-to confirm that the platesetter can hold a 2% dot. 2-Make sure the press can print a 2% dot and check it throughout the run (looking for sharpening). 3- Looking for doubling or other press issues.
Dan Remaley
former GATF

 

[DonBlock]

Check your press chemicals with a drop test. They could be attacking the image on the plate.

 

[Deleted member 16349]

wht would be the cause of images losing its colour while printng. The ratio used is 1:4 and processing time for a plate set by the Fusji technicians is 10-12mins. This processor is AGFA converted to Fuji chemicals

Tarai,

Just some questions to clarify what you mean.

Are you having a problem with the image losing colour in the print or a problem with losing the image itself?

Or are you losing the colour of the image on the plate?

What is happening to your solid densities?