Diagonal registers icons desapeared !!!!!!

[medjber]

Hi,
on my cpc 1 i have lost command icones for the diagonal registers on two groups,
how can i get them back??

 

[Pressmanscooter]

My guess... when you powered up, those 2 cocking motors failed the init test, so CPC will not recognize they exist when it loads. When CPC started up, what screen did it display? Did it say SSK at the top and have a number blinking below?

 

[chock]

Hi sir
Please see his email
Let me know
[email protected]
cell+WhatsApp:+50588611441

 

[medjber]

Hi,
The CPC boot normaly without any blinking number.
When i exchange motors connectors inside the cpc and switch it up, nothing happend except that i can control the exchanged motor from the other group.

 

[chock]

Dear Sir:
I saw you have a lot of trouble, but relax.
1) Please try to replace 3 digit display board, the 7 segment display can be defective.
1a) Try to test the voltage a lamp, a replace lamp or button,make continuity test with a DMM.
2) check the connecting cables againts the interconnection cables.
3)replace the P.C.B or control board too.
Let me know.
Blessing.
[email protected]
cell+whatsApp: 505 88611441​