Dolev 800 errors

[konika44]

We have a problem in my dolev 800
when i sending job for exposing my machine shown 2 errors

laser extra current
Fine Calib Fault

how can i repair this error

please help any budy...........

 

[PACH]

We have a problem in my dolev 800
when i sending job for exposing my machine shown 2 errors

laser extra current
Fine Calib Fault

how can i repair this error

please help any budy...........

Hi Konika,


COLOR="Red"]laser extra current ... This is a Warning message when extra power was used during calibration. It points to the Static Optics

Fine Calib Fault[/COLOR]

Here the Static Optics cannot provide Res/Int values...........It points to a problem with the Static Optics OR the OMC board.

Conclusion : the common denominator is a faulty Static Optics. Good luck.

 

[osmond]

a very familiar error to me last christmas... a faulty Static Optic.

 

[Don OReilly]

I am having a similar error on my 4PressV:
Course Calib Fault
when I load all boards in service utilities, they all pass.
when I run diagnostics in service utilities, they all pass.
Not sure what to try next.... Default Setup?
THANKS
Don

 

[leo]

Hmm, i think this is Static Optic problem. I used to face it before. You should try to find one working laser (Static Optic) to replace and see if it's happened or not.

Good luck
Leo.

 

[js517]

We have a problem in my dolev 800
when i sending job for exposing my machine shown 2 errors

laser extra current
Fine Calib Fault

how can i repair this error

please help any budy...........

Laser extra current Description Tips POSSIBLE CAUSE (S)
Back

Warning message.

The extra current function was used during the light calibration.
If the message appears consistently, schedule static optic replacement

 

[pwydler]

Change the laser board or the laser or maybe the fiber is broken and you'll have the same problem when changing lasers