Has anyone ever used a Solna 464
- Thread starter Comica
- Start date
Willy Pichler
New member
Re: Has anyone ever used a Solna 464
I worked in a shop that had 3 of them. Like most things in life they were as reliable as the operators. A good operator can produce good quality work with few breakdowns. In that shop however they were used mostly as a training ground for feeders looking to become pressmen. They're not, in my opinion presses that can take a severe pounding, rather they require a gentle touch. Another shop I worked at had a 264 and it was a total nightmare. It seems that the press was built with the wrong size oilers so after just 6 months of limited production the impression cylinder bearings had to be replaced. When the plate and blanket bearings had to be replaced after another 6 months the problem of wrong oilers was found. All repairs were done under warranty but lost production time forced the company to buy a 2-colour Miller as a replacement.
BTW, Miller = German Solna
I worked in a shop that had 3 of them. Like most things in life they were as reliable as the operators. A good operator can produce good quality work with few breakdowns. In that shop however they were used mostly as a training ground for feeders looking to become pressmen. They're not, in my opinion presses that can take a severe pounding, rather they require a gentle touch. Another shop I worked at had a 264 and it was a total nightmare. It seems that the press was built with the wrong size oilers so after just 6 months of limited production the impression cylinder bearings had to be replaced. When the plate and blanket bearings had to be replaced after another 6 months the problem of wrong oilers was found. All repairs were done under warranty but lost production time forced the company to buy a 2-colour Miller as a replacement.
BTW, Miller = German Solna
Similar threads
