Mottle on Konica C2070

[utsfoil]

When I ran Xerox machines I used NVM to help remove mottle from uncoated stocks. Now on a Konica and struggling with producing rich colour. I have upped the density to maximum and also changed the Fusing Speed. Thanks in advance for any help.

 

[jwheeler]

We have an older C8000 so it may not be exactly the same...but we get that sometimes so we will do a color calibration on that specific stock using the uncoated profile. If that still doesn't work, we place a service call. I think they refresh the developer and/or replace the drums, etc.

 

[utsfoil]

We have an older C8000 so it may not be exactly the same...but we get that sometimes so we will do a color calibration on that specific stock using the uncoated profile. If that still doesn't work, we place a service call. I think they refresh the developer and/or replace the drums, etc.

Thanks J
Worked well. I did not do this because the guy I replaced hadn't calibrated for 6 months so did not think of this as an option even though it is my goto when I have a colour problem.