Polar 90 cutting problem

Dieudos123

Well-known member
Hi everybody,
Please anyone can help me with POLAR 90?
It has the following problem:
When I try to cut sometimes it cut and sometimes it does not or the knife
remain down.I have changed hydraulic oil but no change.What can cause this?
Thanks in advance.
 
Hi Dieudost123

To help I need to know which type of machine you have.
On the name plate you can find the machine type and the number.
Do you an electrical drawing?

Buntpapier
 
Polar 90 cutting problem

Hi Buntpapier,
Thank you for your reply.
The machine is:

POLAR 90 MOHR
Model:90 CF
Masch Nr:4511280
220V /17.3A /50HZ
If possible I need Electrical diagram and hydraulic diagram.
 
Hi Quadraernie,
I thank you for the reply.
I have contacted you through your E-mail.
Please check your E-mail.
 
Hi Dieudos123

To fix this problem you need somebody who knows Polar-Cutters. Your problem is an electrical problem. Mostly the board 8 or the gearbox limit switches are broken. But instead of changing expensive parts I would suggest that somebody checks the machine first.

The machine was delivered with the following drawings:
90CE-1101c
90CE-1102c
90CE-1103c
90CE-1104c
SE-0209/1
To send the drawing I need a Mail-address

Best regards
Buntpapier
 
Hi Buntpapier,

Could you please send me a copy of the wiring diagrams for the Polar 90 CE as well.
I am in desperate need.

Thank you.
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top