polar-mohr 92 problem

[Didos]

HI,
Please I have the problem with polar-mohr 92 monitor
anyone can help me?
When I suitch it on every thing is ok but the knife dosn't
go down if buttons are pressed and on the screen it display
the following message:TIME OUT ERROR KNIFE.
What is the meaning of this message?
Thanks in advance.

 

[rbailleu]

is the knife all the way to the top, did it come down a little some how. I have an prism which is a clone of the old polar. if the blade is not at the top and the back gauge is moved or the cutter switched off then I have to manually top out the blade. and restart.

 

[Didos]

polar 92 EMC-MONITOR

polar 92 EMC-MONITOR

HI,
rbailleu,the knife all the way to the top,I tried all things but no result.
Please what is the blade and how to top it out?

 

[rbailleu]

if your cutter is the same as mine. turn it off. find the fly wheel on the side. insert 2 manual cranking screws 12 inch long t handle .5 inch with bolt on end. hand crank the machine back and forth until your fairly certain the knife/blade is at its highest point. you may want to go through a complete cycle. make sure all safeties are in place and all position switches are set correctly.

 

[Didos]

HELLO,
Rbailleu,
Thanks I am going to try.