• Best Wishes to all for a Wonderful, Joyous & Beautiful Holiday Season, and a Joyful New Year!

polar-mohr 92 problem

Didos

Member
HI,
Please I have the problem with polar-mohr 92 monitor
anyone can help me?
When I suitch it on every thing is ok but the knife dosn't
go down if buttons are pressed and on the screen it display
the following message:TIME OUT ERROR KNIFE.
What is the meaning of this message?
Thanks in advance.
 
is the knife all the way to the top, did it come down a little some how. I have an prism which is a clone of the old polar. if the blade is not at the top and the back gauge is moved or the cutter switched off then I have to manually top out the blade. and restart.
 
polar 92 EMC-MONITOR

polar 92 EMC-MONITOR

HI,
rbailleu,the knife all the way to the top,I tried all things but no result.
Please what is the blade and how to top it out?
 
if your cutter is the same as mine. turn it off. find the fly wheel on the side. insert 2 manual cranking screws 12 inch long t handle .5 inch with bolt on end. hand crank the machine back and forth until your fairly certain the knife/blade is at its highest point. you may want to go through a complete cycle. make sure all safeties are in place and all position switches are set correctly.
 

InSoft Automation

InSoft Automation Unveils Imp Version 14

Revolutionizing Layout Planning and Automation

InSoft Automation announces the launch of Imp Version 14, the latest iteration of its industry-leading cost-based layout planning software. Packed with cutting-edge features, this release redefines efficiency, automation, and workflow optimization for printing and finishing processes.


Learn more…….

   
Back
Top