Hello Everyone!
I am currently using Mimaki UJF 3042 hg and Rasterlink Pro5 IP. I am brand new to printing, just started at this specialty print shop a few weeks ago.
I am trying to print on a hockey puck. The logo is black, cyan, magenta, and yellow. I would like the black to be output in white color since the puck is black. When I do mono color replacement, I can't use auto primer+white and auto clear. However it would not allow me to pick the input color in the set multicolor replacement section.
I don't know what I am doing wrong? The multicolor replacement seems only work sometime (if I am lucky!) and definitely not working when I need it most! Very frustrated... PLEASE HELP
x
June
Here's the setting I've selected so far:
LF-140CMYK
UV-PET v3.1-1
720*900VD
Pass:24, Overprint:1 time(s)
24PASS
CIPWW
PANEL SETTING
GLOSSY PRINT (100%, 1 PRINT, 1 UV)
AUTO SPECIAL COLOR
-VALID PIXEL
-100% PRIMER, 100% WHITE, 100% WHITE
AUTO CLEAR COMPOSITION
-VALID PIXEL
-100% CLEAR2
I am currently using Mimaki UJF 3042 hg and Rasterlink Pro5 IP. I am brand new to printing, just started at this specialty print shop a few weeks ago.
I am trying to print on a hockey puck. The logo is black, cyan, magenta, and yellow. I would like the black to be output in white color since the puck is black. When I do mono color replacement, I can't use auto primer+white and auto clear. However it would not allow me to pick the input color in the set multicolor replacement section.
I don't know what I am doing wrong? The multicolor replacement seems only work sometime (if I am lucky!) and definitely not working when I need it most! Very frustrated... PLEASE HELP
x
June
Here's the setting I've selected so far:
LF-140CMYK
UV-PET v3.1-1
720*900VD
Pass:24, Overprint:1 time(s)
24PASS
CIPWW
PANEL SETTING
GLOSSY PRINT (100%, 1 PRINT, 1 UV)
AUTO SPECIAL COLOR
-VALID PIXEL
-100% PRIMER, 100% WHITE, 100% WHITE
AUTO CLEAR COMPOSITION
-VALID PIXEL
-100% CLEAR2