SBR 20 error code Agfa Accuset 800 Plus

[Onino]

Occasionally appears SBR 20 error code on when starting imagesseter, after turning machines off and starting again everything is ok operating normally.
Does anyone can tell what it is about representing error code SBR 20
I would not want to be boring to aal of You but here in Montenegro We have no just any support of services Agfa.
Thanks in advance.

 

[VladCanada]

SBR - Single Board RIP
During boot-up process Accuset will try to establish contacts with RIP, which is on-line yet.

From AGFA Field Service Bulletin:

Question

How do I clear a 20 SBR error ?

Answer

Most SBR errors are due to an improper bootup sequence of the Accuset and RIP. In this instance the RIP is online before the Accuset has booted. Take the RIP offline or shut it down completely and then turn on the Accuset. Turn on the RIP after the Accuset has booted. or put it off-line in case SoftWare RIP

If the SBR error message will not clear from a proper boot sequence then service will be required.

If the Accuset has a built-in RIP and the SBR error is displayed then service will be required.

 

[Onino]

Thank you very much VladCanada, pretty good news is that it is not the imagesetter hardware
Best Regards,
Nenad