Signaseter Screen problem

[Selim Reza]

Hi

My Imagesetter(Signasetter) works good except screen problem. When I sent 100% (100X70cm) black image to imagesetter, its output produce startpoint 100% solid but end point becomes 85-90%. And if I send 70% screen, startpoint & endpoint's screen become different (that is start point become 70% but end point is about 60%.) and at end it produce some extra dot like falling rain. And I'm sure screen problem is comming from imagesetter not from processor because I Check this in another Processor and no Leakage of light to imagesetter from out side.

So, your help will be appreciated highly.

Thanks
Selim

 

[HW01637]

Hi Selim, is it vacuum problem...

Is whole of the film mount tight at the drum...
Sometiomes vacuum problem can cause register problem
and may also screen problem.