Jim Restle
Member
I have a strange issue that I wonder if anyone else has run into. We run color proofs to Epson 9900 with built-in Spectro through ORIS Color Tuner. Jobs have started to fail when reading the IDEAlliance GRACoL print target. The B11 color (which looks like a 50% tint of the dark green) is always the color that exceeds maximum dE. The other numbers are generally around 1.0 dE.
Here's the weird part. If a file contains objects that are green, the target passes easily. Otherwise it fails each time.
The nozzle checks are good, and I have done cleanings (as well as just the orange-green pair clean), but the results are always the same. I have also recalibrated via ORIS Color Tuner after replacing any inks that were low in ink.
Any thoughts?
Thanks
Jim Restle
Here's the weird part. If a file contains objects that are green, the target passes easily. Otherwise it fails each time.
The nozzle checks are good, and I have done cleanings (as well as just the orange-green pair clean), but the results are always the same. I have also recalibrated via ORIS Color Tuner after replacing any inks that were low in ink.
Any thoughts?
Thanks
Jim Restle