I am doing a letter fold but do to the poor layout I am having to make a big adjustment on the fold. The first fold is at 3 3/8" and the second is 3 13/16", and I am folding up & up & out. The edge of the inner panel edge is about 7/16" from the crease.
What is happening is the inner pannel is getting folded and sometimes torn randomly. The only thing I can figure is when it makes the second fold the inside panel's edge isn't going into the rollers flat and that is likely due to the distance it is from the next fold. Is this something I just have to live with or is there a way to set this job up so that I wont have to fight this problem?
What is happening is the inner pannel is getting folded and sometimes torn randomly. The only thing I can figure is when it makes the second fold the inside panel's edge isn't going into the rollers flat and that is likely due to the distance it is from the next fold. Is this something I just have to live with or is there a way to set this job up so that I wont have to fight this problem?