Fuji_Luxel T-9000 CTP Blower error

clarencefm

New member
Kindly assist.

Our is an ancient CTP (Screen PT-R8000) but very reliable. Recently I encountered an error while imaging. The error is "E018c: Error has occurred on the blower. Please turn off the blower, and turn on after waiting 10 seconds. Also, confirm whether or not the connectors doesn't come off." I tried switching off for more than 10 minutes at one time and now received a different error 'Servo address ilegal'. The error E018c is also coming up if I try to do a fast drum test but a slow drum test checks out fine. All connectors and vacuum pipes are intact - no leaks. I checked the servo pack for any obvious issues and couldn't pick out any.

I have however introduced another error while I was checking around. This time the plate wont load at all with error E517c Mechanical error: PH25H/A sensor doesnt switch on. I change increase a bit light sensitivity on the two fibre sensors, I get error E5139: Mechanical error,
PH25 sensor is ilegal. The sensor detects a plate during plate loading
Anyone who can help me out from this mess.

* A little background info. I am an ICT consultant and one of my client bought this CTP from an auction some 5 years ago (we are in Zimbabwe). I have learnt my way around it over the years with nothing much in terms of manuals except an installation guide for a PT-r4300 engine. Support is very thin as engineers have to come all the way from South Africa.

Any help is most appreciated.

Clarence
 
Kindly assist.

Our is an ancient CTP (Screen PT-R8000) but very reliable. Recently I encountered an error while imaging. The error is "E018c: Error has occurred on the blower. Please turn off the blower, and turn on after waiting 10 seconds. Also, confirm whether or not the connectors doesn't come off." I tried switching off for more than 10 minutes at one time and now received a different error 'Servo address ilegal'. The error E018c is also coming up if I try to do a fast drum test but a slow drum test checks out fine. All connectors and vacuum pipes are intact - no leaks. I checked the servo pack for any obvious issues and couldn't pick out any.

I have however introduced another error while I was checking around. This time the plate wont load at all with error E517c Mechanical error: PH25H/A sensor doesnt switch on. I change increase a bit light sensitivity on the two fibre sensors, I get error E5139: Mechanical error,
PH25 sensor is ilegal. The sensor detects a plate during plate loading
Anyone who can help me out from this mess.

* A little background info. I am an ICT consultant and one of my client bought this CTP from an auction some 5 years ago (we are in Zimbabwe). I have learnt my way around it over the years with nothing much in terms of manuals except an installation guide for a PT-r4300 engine. Support is very thin as engineers have to come all the way from South Africa.

Any help is most appreciated.

Clarence
did u get thru..??
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top