Search results

We have had similar issues with double sided coro, sintra, or catapaque. In my experience I line up the media on the table rulers. print first side, then use a regular ruler and mark out the edges on the 48 in corner, and do the same on the opposite end leaving a mark on the table, mark the...

Ill keep some of that in mind, turns out swapping an LED out fixed us right up :\ sad because there is no warning when it happens. Sorry for the late response on this.

Does anyone know if there is any other color registration adjustment other than the "Adjust Registration" in the "Calibration" Menu? All consumables including (drums, toner, belt and fuser) are current in the envelope press.

Its only for between copies when colate is on. We used to use slip sheet with ours, we found it slowed run time too much when it has to pull a different sheet from another drawer. So we opted for sheets that are not 13x19 to simply Offset them :)

It's difficult to get consistency with toner based machines. Calibration is a must or it seems to help our shop a lot. Also, we started exporting pdf's with spot colors (when required) and choosing to "include all profiles". With that we have also changed to DOT2 in our config on the c6500, so...

ear plugs? lol

Yes do the math.. it doesn't add up.. as far as the aftermarket I have heard the same. .that some of the toners are no good (cheap) and cause problems. I got lucky with my first choice and will only buy from the same source since it is working perfectly!

As stated in the title. Our shop hasn't utilized either feature when sending large jobs to the RIP. Now that we are doing larger Variable Data jobs I would like to implement a workflow for it. Why? Mainly because it will cut down on file size and process time for the RIP. Also eliminating having...

good for short run, straighshooter feeder is prob the best addition imo. a bit expensive for consumables but you can probably refill the toners to cut a little cost. Drums are really difficult to repair and expensive to replace. I heard from a little bird the roller is the only thing in the drum...

Creo IC-304 does in INFO>ACCOUNTING. has rip/process time, print start and end, color/bw clicks. Can be exported/printed but is a bit finicky with output.

Duplicate the job (after you set parameters, ie QTY=100 etc, make sure colate is off if necessary for 1page job, and per previous post choose slipsheet and which tray to pull them from), and duplicate the job 10 times etc for 1000.

this might be what your looking for: Paper Weight Conversion Chart - Grams to Lbs www.genedel.com - Paper Weight Chart

Any luck with this? would be helpful.. We have CS3/4, and inx is nice for sending/opening CS4 file in CS3..

It appears this could be done a number of ways.. but maybe a simpler approach would be to draw the shape/object .. Open the swatch panel and then open the swatch libraries to pick your Pantone set Coated/Uncoated etc. then press CTRL+F9 to open the Gradient as well (might be tricky in CS3/4...

all fixed now.. tech came and sucked out some stuff .. must have been some dust or random peice of garbage.. back to printing finally!

If i use the IC-304 Rip its a "digital color machine/press" if i use the POD/ no RIP then its a digital color copier :\ if i make booklets "finished product" its a nifty digital booklet maker machine. have fun deciding what to call yours!

Just had the coronas replaced and drums etc a few weeks ago along with some other prevent. maint. . when we look at the line through a loop the dots go into it but its almost as if its a white hairline..

Been fighting this issue for a while but have made do but its becoming a problem with some of our newer jobs. Usually only occurs on larger stocks 11x17 12x18 and 13x19. appears when there is a solid or picture in the document. From a distance you wont see it but upclose in correct light its...

Looks like both are running... i had a util on the web area of the IC-304 to remove drivers .. doesn't look like its getting all of them out.. gotta link to the newer one?

I can check if both drivers are running, I remember seeing the IC-304V1.exe and IC-304V2 on my laptop running at the same time.. I hope its as simple as that.. I will check a few desktops in the shop and see..