Xerox D700

[Ankedo]

Good for every one

I have xerox d700 , the problem was when i print any job the color BLACK in final result go to GRAY color, i change black drum and change toner, and still the same result ..... what i do for it???

thanks for all

 

[johntheventer]

Hi Ankedo…

Does this happen on most things you print or perhaps only on thick board or gloss?

Did this start happening all of a sudden? Someone might have changed the colour profile settings - so you think you are printing an RGB file but the printer is handling it as a CMYK using pure black etc…?

 

[johntheventer]

Hi Ankedo…

Does this happen on most things you print or perhaps only on thick board or gloss?

Did this start happening all of a sudden? Someone might have changed the colour profile settings - so you think you are printing an RGB file but the printer is handling it as a CMYK using pure black etc…?

 

[Ankedo]

Hi John....

It's happened in all paper types.... but what about colour profile?? what do you mean?

thank you for your time

 

[johntheventer]

Ok - let me rather ask some better questions… We have a Xerox D252 - older but probably similar in many ways...

How much lighter is the black - a solid cover of black using only black toner will result in a slightly "Light Black" - not a rich dark black - if it is very very light, there is more wrong than incorrect colour settings…

Also - Read the manual that came with the command station printing - if that is what ou are using - it is actually quite well written and helpful …

If you have never printed using colour profiles or are unfamiliar with them than you need to read up on this - google will spit out millions of sites dealing with this issue - it does sometimes feel like you never really get the answer and sometimes difficult to wrap your head around certain ideas that seem simple on the surface of it - but ask questions here - lots of folks far far far more qualified than me to help.

 

[mojoprime]

yeah, are you just printing black and white or greyscale, or are you getting the same result when you print in full color?

 

[Ankedo]

Thank you John for your interest.....

Mr mojo it's the same in black and white or grey or full color.... thank you

 

[Ankedo]

This is calibration paper

imgur: the simple image sharer