Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Staples for Xerox Versant 80

Collapse
CanonKonica Minolta
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • xcelprint
    started a topic Staples for Xerox Versant 80

    Staples for Xerox Versant 80

    Where do you folks buy staple cartridges for the Versant 80?

    Thanks.

    Neal

  • KopyBoss
    replied
    We order our Xerox staples from : https://www.gmsupplies.com never had a issue...

    Leave a comment:


  • Shawnd
    replied
    Just not Xerox that charges an arm and a leg, Ricoh is not any better in that department. I about spit my coffee on the screen the first time I had to reorder the cartridges for my 7110 booklet maker.

    Leave a comment:


  • PricelineNegotiator
    replied
    Originally posted by AP90 View Post

    Haven't had any problems with jamming. Occasionally we do have a cartridge that will stop stapling, but i just remove a strip and it usually goes back to normal. We had that same problem with OEM occasionally too so I chalk that up to just happenstance. Even if you had to throw a cartridge or 2 away every now and then, your still coming out way ahead if you ask me. Also, we run 13-15k magazines a month through ours, so I feel like if we haven't had a problem yet then we won't and no one else would/should.
    Good enough for me. Thanks for the information.

    Leave a comment:


  • AP90
    replied
    Originally posted by PricelineNegotiator View Post
    Have you ever had any issues with jamming or anything?
    Haven't had any problems with jamming. Occasionally we do have a cartridge that will stop stapling, but i just remove a strip and it usually goes back to normal. We had that same problem with OEM occasionally too so I chalk that up to just happenstance. Even if you had to throw a cartridge or 2 away every now and then, your still coming out way ahead if you ask me. Also, we run 13-15k magazines a month through ours, so I feel like if we haven't had a problem yet then we won't and no one else would/should.

    Leave a comment:


  • PricelineNegotiator
    replied
    Have you ever had any issues with jamming or anything?

    Leave a comment:


  • xcelprint
    replied
    Yes we do not use a lot of staples either but I was surprised how expensive the cartridges were from xerox.

    Leave a comment:


  • AP90
    replied
    Originally posted by wonderings View Post

    Where do you buy your knock offs? I have always bought direct from Xerox thinking it was the only option. I do not go through a ton of staples so it is not a huge thing for us but if I can get something cheaper that works in the future would love to do that.
    http://www.precisionroller.com/008r1..._pn_57727.html

    Leave a comment:


  • wonderings
    replied
    Originally posted by AP90 View Post
    Not sure which ones your looking for, but we get ours from Sun Data Supply or Precision Roller. Seems to be just about the cheapest options. With our V3100 booklet maker we are able to buy the cheap knock offs made in India for like 1/3 of the cost of OEM. Saves a ton and Lets me buy 6 months supplies at a time without spending a fortune.
    Where do you buy your knock offs? I have always bought direct from Xerox thinking it was the only option. I do not go through a ton of staples so it is not a huge thing for us but if I can get something cheaper that works in the future would love to do that.

    Leave a comment:


  • AP90
    replied
    Not sure which ones your looking for, but we get ours from Sun Data Supply or Precision Roller. Seems to be just about the cheapest options. With our V3100 booklet maker we are able to buy the cheap knock offs made in India for like 1/3 of the cost of OEM. Saves a ton and Lets me buy 6 months supplies at a time without spending a fortune.

    Leave a comment:

4OverStandard FinishingDuploSmartsoft (Presswise)CanonKBAUltimate
CanonDuploStandard Finishing

What's Going On

Collapse

There are currently 2893 users online. 53 members and 2840 guests.

Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

Working...
X