Problem in Xerox 700

[Ankedo]

Hello every one
I have a problem in Xerox D700, when i print in it the result of printing The show was removed ink in several places, especially in dark colors printing

Thank you for help

 

[arossetti]

Can you show us a picture?

 

[Ankedo]

I try to upload a picture

 

[arossetti]

Excellent. If you have trouble you can private message me and I will give you my e-mail address.

 

[Ankedo]

Sorry i can't upload picture here can you help me?

 

[arossetti]

try uploading it to imgur: the simple image sharer and then linking us the photo.

 

[Ankedo]

That is
http://i.imgur.com/Nz3s7HA.jpg?1

 

[Ankedo]

http://i.imgur.com/Nz3s7HA.jpg?1
this is a picture problem look in white area

 

[arossetti]

On first glance it looks like the paper settings are improper. I'm guessing this is a coated cardstock, have you told the printer coated heavyweight?

If it is not the paper programming then I would say it is your fuser.

 

[Ankedo]

The paper settings is Ok, and this problem appear with multi fuser
thank you

 

[ajr]

Fuser problem, maybe not hot enough set the stock on heavyweight ie 300g and coated.

 

[Ankedo]

Thank you ajr... i make your advice and there is a good result... but if i want to print in 300g really what can i do???
thank you again
and thanks for Mr. arossetti

 

[arossetti]

I would think those same setting would still be ok for 300gsm.

 

[Stochastic]

Looks like you will need to get your service tech to check the fuser nip distance.
It would pay also to ensure that you have a custom paper profile assigned where you can Adjust Image Transfer values to get the best transfer. Remember, the lower the value the better the transfer. It's backwards.

http://i.imgur.com/Nz3s7HA.jpg?1
this is a picture problem look in white area