Xerox 700 With Bustled Fiery Rip - Uncompressing linux... ok booting the kernel

C

CreativeMonkee

New member
I'm new to the Digital Printing field from an owner's perspective. Recently I purchased a Xerox 700 Digital Press with Integrated Fiery Rip. The unit was used, I bought it untested and uncertified. It turned on just fine at first, I networked it and ran a few test jobs to it from my computer. During one of the test prints, I got an error that required me to shut it down and start it back up. After the reboot, I noticed not all the services came back up and It now had error 041-332 on the screen.

The rip is from the research I did a "Bustled Rip E10-02". It looks to be running a version of Linux (maybe Debian 4.0). In my attempts to troubleshoot the issue, I connected a monitor to the Rip. It starts up fine, runs its bios checks, but gets stuck on "Uncompressing linux... ok booting the kernel" then after a few minutes it just shuts down. Have any of you ever seen this before?

I'm hoping someone can help me out or at least point me in the right direction to get this fixed. Without the Rip the machine is just a copier, can't send jobs to it any other way!! :(

I think if I had the original install discs for this version of Rip I may be able to simply reinstall or repair the OS.


Any feedback would be greatly appreciated.


Thanks.
 
There lies the problem. I don’t have the discs. I found someone claiming they have them on eBay but they want $350 for them. Maybe someone who reads this post has them and could copy them for me. Or sell them for cheaper than $350?
 
Last edited:
I had this same thing happen once to my 700, I hooked up the monitor and saw it sitting at the booting up screen then it would reset. I went through and cleaned everything inside the fiery and unhooked the hard drive and rehooked it back up and took the memory out and put it back in and let it sit for 30 minutes then booted it back up and it has worked since then.
 
You can have a Xerox dealer download the OS files from the eFi partner site for you and copy to a thumbdrive. You shouldn't have to pay for the discs. You may want to contact EFI directly for support to get you the needed files as an alternative.
 
I'm in Tucson, AZ. I called a few dealers here who service Xerox and none so far can or know how to service the Rip, I guess it's too old for these Techs or maybe it's because its the Linux OS. If it was a newer model running Windows it might be a different story.

I do have some good news tho! :) – Initially, when I started having issues the IT Tech in me decided to clone the Rip's hard drive in case the problem was that my hard drive was failing. I then restored the image I pulled, on to a spare HD I had. That caused a few other issues. I got an "L99 99 error" when booting. After hours of research and failed attempts to correct it, it turns out the error had to do with the fact that the original HD was 80gb and the one I restored to is 160gb. Or so I thought. I bought an exact replacement of the original 80gb HD (brand, size and all). I restored the image I had on to that exact replacement... Same result! L99 99 99!!!

Once again the IT Tech in me took a step back and thought about the issues I was having. Initially, I had pulled the HD image using Ghost (a cloning utility for Windows). The base system on my Rip is Linux. I began to think maybe that had something to do with the results I was getting from my cloned HDs. Not being that familiar with Linux I research a HD cloning program for Linux. I found CloneZilla downloaded an ISO and made a bootable USB using Rufus. Booted up using the USB, created a new Image using Clonezilla, restored it to the replacement 80gb HD I bought, connected it back to the copier and it booted up fine. I can now interface to the Rip using my web browser. :) So far so good!!!

I'm still getting the error 041-332 on the copier. But since The Rip is now responding at least to the network, Now I'm gonna check the crossover ethernet cable and SCSI cable that interfaces the Rip to the copier. Maybe they are damaged. I'll keep you all posted.

I wanted to share my adventures with the HD cloning in case anyone else runs into the same issue. Using the cloning program designed for the base OS of my Rip resolved the issues I was having after cloning the same HD using cloning software intended for Windows. - Lesson learned!!!
 
Glad to hear you can see the controller on the network. You may want to shut the printer and controller down and reseat the boards since it is a older unit. On the EFI site there is a free cloning tool designed for the Fiery controllers. This avoids 3rd party software. NOTE: There are multiple hidden partitions on the drive.
 
Thank you for the advice. I'll look into that cloning tool. I did notice those hidden partitions when clonezilla was running. You learn something new every day!! :)
 
Good night.We are having a problem with our Xerox digital press 700. We are trying to print from this machine,it says that it is printing but nothing is coming out.Can anyone help us with this?
 
Yes ,several times.We have had little use of this machine because of this problem.We can print on the scanner but when we send files it says printing but nothing happens.

The issue with the 700 is that both the machine and the computer turns on fine which is no issue.
The issue is that when you send something to the rip it goes through and says waiting to print and on the printer it says printing. but nothing happens after that. The printer doesn't start initiating the printing sequence
 
I have the same issue with my old 700i, we barely use it now so it sits most of the time for our accountant to use. I have not tried cleaning the fiery again to see if it fixes it. Somedays it works and somedays it throws up the error posted above, it really is hit or miss.
 
I finally got around to doing this, wanted to say thanks to @CreativeMonkee for the directions as they worked great. I ended up doing a disk to disk clone using an older 160gb Seagate drive I had sitting around, my bustled fiery had an 80gb in it. Clonezilla worked great on the usb drive using rofus to load it, just a tip you need to use the .iso with rofus. My 700i had been sitting for the past 2 years powered off, now its alive again.
 
kawilliams said:
Yes ,several times.We have had little use of this machine because of this problem.We can print on the scanner but when we send files it says printing but nothing happens.

The issue with the 700 is that both the machine and the computer turns on fine which is no issue.
The issue is that when you send something to the rip it goes through and says waiting to print and on the printer it says printing. but nothing happens after that. The printer doesn't start initiating the printing sequence
Click to expand...
I know this sounds weird, but try reversing the cables that connect your RIP to your 700. The ones in ours were NOT bi-directional.
 
You must log in or register to reply here.

Similar threads

G
Xerox 1000i - Diagnostics not loading properly due to press serial number being "Not Available"
Replies
9
Views
1445
bigboiient
B
B
Cost difference between the KM IC-602 embedded RIP and the external Fiery IC-306?
Replies
8
Views
4140
Pelicoss
P
J
Fiery EX J75 RIP problems (Xerox j75 press)
Replies
16
Views
9429
wonderings
wonderings
johntheventer
Ricoh vs KM vs Xerox
Replies
6
Views
5395
msaeger
msaeger
V
Bustled Fiery X3ety with Xerox DC260 Problem
Replies
6
Views
12237
wonderings
wonderings

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….

   
Back
Top