Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Brisque Impose Marks

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brisque Impose Marks

    OK all you Brisque dinosaurs, here's a question for you. We are using Brisque impose with Preps imposition. Color bars are added in Preps. We are using a cut back curve when outputting plates. Is there any way to keep the curve from changing the screen patches on the color bar? Any help is appreciated.

    Thanks,

    Monkey

  • #2
    Re: Brisque Impose Marks

    Check this, from the brisque client go to Edit/Preferences/Plate Expose and make sure the Apply ToneRep to ColorBar box is
    not checked.

    Thats assuming you are using a ToneRep curve and not an Excruve.

    Mark

    Edited by: Mark_S on Jan 10, 2008 12:21 PM

    Comment


    • #3
      Re: Brisque Impose Marks

      Thanks Mark. I think that's got it.

      Comment


      • #4
        Re: Brisque Impose Marks

        I thought I had checked (or unchecked) that before.

        Comment


        • #5
          Re: Brisque Impose Marks

          Why would you not want your curve applied to the color bars? How can you check TVI and gray balance (if you are using gray balance) if your color bars aren't output the same way your pages are?

          Comment


          • #6
            Re: Brisque Impose Marks

            The trigger for this is to have "colorbar" in the marks name.

            Comment

            UltimateDuploSmartsoft (Presswise)Standard FinishingKBA4Over
            UltimateDuploStandard FinishingKBAKBA GTIChili publish4Over

            What's Going On

            Collapse

            There are currently 4553 users online. 106 members and 4447 guests.

            Most users ever online was 6,151 at 11:36 AM on 11-17-2017.

            Working...
            X