Introduce yourself!
- Thread starter Cory Smith
- Start date
jdigital
New member
My name is Eric. I have been in the sign industry for 10 years and have been digital printing for 4 years now. I mostly specialize in UV digital printers. We have two Inca flatbeds. I have joined this group to help and find solutions in the digital printing industry. I am also a member of our Environmental ("green") team. I am researching all aspects of print technology and sustainable solutions. I'm glad to help
Eric
Eric
Jimmy from Oregon here.
I've been in prepress since 1994 and have spent the last 12 years working for Precision Digital Imaging here in Portland. We don't have any presses here, we image plates and proofs for many printers in the area that don't want to bother with prepress. We were one of Creo's first Prinergy customers back in 1999 and we have been imaging plates on our Trendsetter on a daily basis ever since. As you can imaging we carry many plate sizes and thicknesses to accommodate our customers.
Believe it or not, we still image film for the few that request it. We have an Avantra 44. Most of the film we image is for engineering applications such circuit boards. There are just a few printers that we work with that still burn their own plates from negs.
About 2.5 years ago we started offering digital printing for the trade. We run a Cannon 7000.
I've been in prepress since 1994 and have spent the last 12 years working for Precision Digital Imaging here in Portland. We don't have any presses here, we image plates and proofs for many printers in the area that don't want to bother with prepress. We were one of Creo's first Prinergy customers back in 1999 and we have been imaging plates on our Trendsetter on a daily basis ever since. As you can imaging we carry many plate sizes and thicknesses to accommodate our customers.
Believe it or not, we still image film for the few that request it. We have an Avantra 44. Most of the film we image is for engineering applications such circuit boards. There are just a few printers that we work with that still burn their own plates from negs.
About 2.5 years ago we started offering digital printing for the trade. We run a Cannon 7000.
anjanmazumdar
New member
Dear All
I am Anjan a new member in Print Planet . I am a Diploma in Printing Technology and currently employed as Asst Vice President at HT Media Ltd . Have 29 years of experience in printing and Publishing industry . My friend introduced me to this lovelely networking and knowledge enhancing site . I am sure to benifit out of Print Planet . And will try to contribute as well .
Thanks and Cheers
Anjan Mazumdar
I am Anjan a new member in Print Planet . I am a Diploma in Printing Technology and currently employed as Asst Vice President at HT Media Ltd . Have 29 years of experience in printing and Publishing industry . My friend introduced me to this lovelely networking and knowledge enhancing site . I am sure to benifit out of Print Planet . And will try to contribute as well .
Thanks and Cheers
Anjan Mazumdar
Hello EveryOne:
My name Wally Adeshina, have been selling Ricoh, Riso duplicators for over 10 years and now adding Duplo products. I travel everywhere in the world and have customers in many countries as well. I love helping anyone with their duplicator(s) problems without charge on the phone because it doesn't matter whether you buy from me or not but just willing to help anyone. Please feel free to contact me. My number is: 813-300-9570 and email is: [email protected]. I am glad to be a member of the print community.
My name Wally Adeshina, have been selling Ricoh, Riso duplicators for over 10 years and now adding Duplo products. I travel everywhere in the world and have customers in many countries as well. I love helping anyone with their duplicator(s) problems without charge on the phone because it doesn't matter whether you buy from me or not but just willing to help anyone. Please feel free to contact me. My number is: 813-300-9570 and email is: [email protected]. I am glad to be a member of the print community.
toucandesign
New member
At Toucan Design we just launched an automated printing system that we are also marketing on our sister site Print Four Color that allows us to receive orders directly from our website, direct to plate and get both business cards and postcards out the door in 24 hours. We are looking forward to reporting in at Print Planet how this new technology is working for our press.
Kristar
Member
Re: Introduce Yourself
Re: Introduce Yourself
Hey all
I am a baby compared to some of you out there. I have been working in dye sublimation for maybe six years now, running a few types of large-format printers, a couple of types of Mimaki's and Dupont Artistri.
I am currently delving into the wonderful world of Profiling. So, I may be asking related questions to this. Especially, for ONYX and Colourburst profiling software.
Looking forward to hearing, ummm, reading your comments and gaining knowledge from your experience
Krista
Re: Introduce Yourself
Hey all
I am a baby compared to some of you out there. I have been working in dye sublimation for maybe six years now, running a few types of large-format printers, a couple of types of Mimaki's and Dupont Artistri.
I am currently delving into the wonderful world of Profiling. So, I may be asking related questions to this. Especially, for ONYX and Colourburst profiling software.
Looking forward to hearing, ummm, reading your comments and gaining knowledge from your experience
Krista
PrintersLounge
New member
Hello to everybody and many thanks for your kind invitation.
Following your request to introduce myself I want to give you a brief overview about me and my work.
First of all the Google search link (also a new trend)
:
http://www.google.com/search?q=Alexander+Dort&hl=en
I'm owner of a full service advertising, marketing and design agency saddled in Germany named Dort and Schmitt. Our main business is the printing industry. Working for this industry sector since 21 years now means that we've a complex knowledge and broad network we're willing to share. To do so and in combination with our knowledge about Software programming and Web 2.0 networking we've used the last three years to develop a comprehensive new platform for the print and media industry. This brand new baby - named the PrintersLounge - is now alive since just a few days and has been developed together with our network partners from this industry sector.
If you're interested you can find further information about the Lounge at:
http://www.printerslounge.com/en/printerslounge
As a special offer for all members of this great PrintPlanet forum I want to invite all of you to become a premium member of the PrintersLounge absolutely free of charge and use all features and tools we can deliver for a full year without paying for anything. And don't fear - after this period your accounts will only be reduced to the free account level (and you can use all that free features unlimited in time) so there are no subscriptions, no automated renewals nor anything else you'll have to respect.
Why offering that? Well it's a brand new public beta and we'll need traffic and contents to test our server farm and our back- and frontend so we need members and we need contents and we're glad to provide you as a big thank you for your participation with a real cornucopia of great features to promote your business - also including free of charge advertising banners in the Lounge. Quit pro quo - no more, no less.
To do so and register for free just use this special referral link which let our admins know that you'll register for that free premium accounts:
http://www.printerslounge.com/en/referral/7777d27f
Due to the fact that we'll start also our affiliate programm end of next week you'll be able to use this account also to make money with your recommendations for our lounge by simply inviting your friends and business partners to our network. We'll pay up to 10% for each paid membership you can refer.
So, enough yet - happy and succesful networking here and everywhere to all of you.
Best regards,
Alex
PS: Read our first press statement at http://www.printerslounge.com/en/node/37847
Following your request to introduce myself I want to give you a brief overview about me and my work.
First of all the Google search link (also a new trend)
: http://www.google.com/search?q=Alexander+Dort&hl=en
I'm owner of a full service advertising, marketing and design agency saddled in Germany named Dort and Schmitt. Our main business is the printing industry. Working for this industry sector since 21 years now means that we've a complex knowledge and broad network we're willing to share. To do so and in combination with our knowledge about Software programming and Web 2.0 networking we've used the last three years to develop a comprehensive new platform for the print and media industry. This brand new baby - named the PrintersLounge - is now alive since just a few days and has been developed together with our network partners from this industry sector.
If you're interested you can find further information about the Lounge at:
http://www.printerslounge.com/en/printerslounge
As a special offer for all members of this great PrintPlanet forum I want to invite all of you to become a premium member of the PrintersLounge absolutely free of charge and use all features and tools we can deliver for a full year without paying for anything. And don't fear - after this period your accounts will only be reduced to the free account level (and you can use all that free features unlimited in time) so there are no subscriptions, no automated renewals nor anything else you'll have to respect.
Why offering that? Well it's a brand new public beta and we'll need traffic and contents to test our server farm and our back- and frontend so we need members and we need contents and we're glad to provide you as a big thank you for your participation with a real cornucopia of great features to promote your business - also including free of charge advertising banners in the Lounge. Quit pro quo - no more, no less.
To do so and register for free just use this special referral link which let our admins know that you'll register for that free premium accounts:
http://www.printerslounge.com/en/referral/7777d27f
Due to the fact that we'll start also our affiliate programm end of next week you'll be able to use this account also to make money with your recommendations for our lounge by simply inviting your friends and business partners to our network. We'll pay up to 10% for each paid membership you can refer.
So, enough yet - happy and succesful networking here and everywhere to all of you.
Best regards,
Alex
PS: Read our first press statement at http://www.printerslounge.com/en/node/37847
postnetnc133
Well-known member
Hey everyone my name is Mike and I have been in the industry for 5 yrs doing digital quick printing. Became an owner only 2 yrs ago. Looking to expand and bring offset in house maybe in 5-10 yrs or so when my current business grows to fit the demand to expand.
Looking to learn from others about equipment, vendors and more so ideas to grow my print business.
Looking forward to hearing from everyone and to see what this forum can bring.
Looking to learn from others about equipment, vendors and more so ideas to grow my print business.
Looking forward to hearing from everyone and to see what this forum can bring.
Baldbug
Well-known member
Hi Everyone,
I started in 68 as a Letterpress comp. Did that 17 years. Moved onto Compugraphic PV10's. Then onto Apples in '92. Started Agfa 9400 imagesetting bureau in '96. Moved onto Avantra 25 bureau in '80. Just moved into CTP with Acento II S with Thermal plates, plus we Plan Print/Scan/Copy to A0, Xerox Document Centres, Wholesale/Retail stamps, Laminating, Graphic Design, Wide format Inkjet and I have a Roland Camm-1 Servo that I trying to get my head around at the moment.
Rod
I started in 68 as a Letterpress comp. Did that 17 years. Moved onto Compugraphic PV10's. Then onto Apples in '92. Started Agfa 9400 imagesetting bureau in '96. Moved onto Avantra 25 bureau in '80. Just moved into CTP with Acento II S with Thermal plates, plus we Plan Print/Scan/Copy to A0, Xerox Document Centres, Wholesale/Retail stamps, Laminating, Graphic Design, Wide format Inkjet and I have a Roland Camm-1 Servo that I trying to get my head around at the moment.
Rod
Tony Vangelabbeek
New member
introduction
introduction
Hi,
I'm Tony Vangelabbeek. Together with my wife I've run our own typesetting firm between 1986 and 2005 in Louvain, Belgium. We are specialised in typesetting of scientific books. For almost 15 years we also produced offset films.
In 2001 I realised that prepress offshore outsourcing would become a thread for our jobs. So I slowly started connecting to Indian service providers. In general I was not at all satisfied with the results. Especially the cost savings were almost nihil.
Then, in 2004 we realised that, unless we were fysically present and available for our Indian people, we would never reach the quality, productivity and efficiency levels we (and our clients) became used to.
So we took the hard decision, and we decided to startup our own business in India. In July 2005 Genesis Textware pvt. ltd. was born.
A second hard decision came when we even decided to relocate ourselves to India. We left Belgium in July 2008 and are now full time registered as Indian residents.
Not without any success: at the moment we have 25 employees and growing.
I invite you to read my blog about outsourcing and cultural differences: thewigglingblog
Best regards,
Tony Vangelabbeek & Els Janssen
Genesis Textware pvt. ltd.
introduction
Hi,
I'm Tony Vangelabbeek. Together with my wife I've run our own typesetting firm between 1986 and 2005 in Louvain, Belgium. We are specialised in typesetting of scientific books. For almost 15 years we also produced offset films.
In 2001 I realised that prepress offshore outsourcing would become a thread for our jobs. So I slowly started connecting to Indian service providers. In general I was not at all satisfied with the results. Especially the cost savings were almost nihil.
Then, in 2004 we realised that, unless we were fysically present and available for our Indian people, we would never reach the quality, productivity and efficiency levels we (and our clients) became used to.
So we took the hard decision, and we decided to startup our own business in India. In July 2005 Genesis Textware pvt. ltd. was born.
A second hard decision came when we even decided to relocate ourselves to India. We left Belgium in July 2008 and are now full time registered as Indian residents.
Not without any success: at the moment we have 25 employees and growing.
I invite you to read my blog about outsourcing and cultural differences: thewigglingblog
Best regards,
Tony Vangelabbeek & Els Janssen
Genesis Textware pvt. ltd.
Backlashnz
New member
Hi All
I am currently doing a 'feasability study' for the aquisition of a 'Digital Colour Printer', after many hours of going through my companies outsourcing invoices I have finally been able to put our click rate at 296,000 per year ( I should qualify that I moved from a mainsteam Mail House to a 'Boutique Mail House' where I am the closest thing they have to an expert!!!).
I have vast experience in B & W printing (Xerox 180,4635, Nuvera 120 & Konica 1050).
On top of what we have 'outsourced' potentially we have missed out on 500,000 clicks that we could not quote on through the lack of colour printer, as client had followed their own leads.
The big selling point for me would be being able to mailmerge at the same time as print in colour!
I have approached Xerox, Konica, Canon and Ricoh and am waiting to hear back. What sought of questions should I be asking?
Any help would be greatly appreciated.
Si
I am currently doing a 'feasability study' for the aquisition of a 'Digital Colour Printer', after many hours of going through my companies outsourcing invoices I have finally been able to put our click rate at 296,000 per year ( I should qualify that I moved from a mainsteam Mail House to a 'Boutique Mail House' where I am the closest thing they have to an expert!!!).
I have vast experience in B & W printing (Xerox 180,4635, Nuvera 120 & Konica 1050).
On top of what we have 'outsourced' potentially we have missed out on 500,000 clicks that we could not quote on through the lack of colour printer, as client had followed their own leads.
The big selling point for me would be being able to mailmerge at the same time as print in colour!
I have approached Xerox, Konica, Canon and Ricoh and am waiting to hear back. What sought of questions should I be asking?
Any help would be greatly appreciated.
Si
Servicetech
Well-known member
New Here
New Here
Hello, my name is Ira, I started as a service tech in 1989 for an equipment dealer, I was there 15 years, then i went to a Manufacturer when they took the dealership, I was there 5 years, Now after a layoff I'm back with the equipment dealer as a service tech.
I tried a manufacturing job for 5 months that dried up, now I'm back in the printing industry. It's good to be doing what I'm good at again, hopefully there will be enough work to continue it.
New Here
Hello, my name is Ira, I started as a service tech in 1989 for an equipment dealer, I was there 15 years, then i went to a Manufacturer when they took the dealership, I was there 5 years, Now after a layoff I'm back with the equipment dealer as a service tech.
I tried a manufacturing job for 5 months that dried up, now I'm back in the printing industry. It's good to be doing what I'm good at again, hopefully there will be enough work to continue it.
Hello Everyone,
My name is Surapong J. I'm new in this industry. I founded 'PrintPlanet' from google (search error about CTP of my client).
This community is very interest for me. because it's have the expert in digital print.
My company sales the 2nd press machines, consumable and service. from last year we start to sales a CTP machines. I'm a technical support for this product.
Best regards,
S.J.
My name is Surapong J. I'm new in this industry. I founded 'PrintPlanet' from google (search error about CTP of my client).
This community is very interest for me. because it's have the expert in digital print.
My company sales the 2nd press machines, consumable and service. from last year we start to sales a CTP machines. I'm a technical support for this product.
Best regards,
S.J.
theMadArtist
New member
The Mad Artist at you service- 7 Days a Week!
The Mad Artist at you service- 7 Days a Week!
Working for myself, I have no life- and am almost ALWAYS in front of a computer- even at a friend's house to check my e-mails...
I can actually draw & illustrate, and am a Vector Master, capable of doing a Killer Design for you in just one or two spot colors.
You give me the Details: your budget, the shirt & ink colors, text, etc, and I send sketches for approval, Progress Proofs to show how the art's coming along, then a Final Proof for your customer's approval.
Once you pay me (thru PayPal), I send the art file.
Painless, fast- and simple!
The Mad Artist at you service- 7 Days a Week!
Working for myself, I have no life- and am almost ALWAYS in front of a computer- even at a friend's house to check my e-mails...
I can actually draw & illustrate, and am a Vector Master, capable of doing a Killer Design for you in just one or two spot colors.
You give me the Details: your budget, the shirt & ink colors, text, etc, and I send sketches for approval, Progress Proofs to show how the art's coming along, then a Final Proof for your customer's approval.
Once you pay me (thru PayPal), I send the art file.
Painless, fast- and simple!
CUtntozier
New member
Hello Colleagues,
I noticed there was quite a gap in this thread between 2008-2009 glad to see it picked back up. I have been in this buisness since I was 14y/o I am now 47 you do the math...the number scares me. I have worked in just about every area you can think of in a shop, I caonsider that to be great experience. I have worked in smal Mom&Pop shops, large commercial companies and in-plants (sounds like I can't keep a job). Most of my life has been in California but I now find myself in Colorado working for the University of Colorado. I am a returning member of Printplanet and I am happy to be back. This is a great resource for the exchange of information and I look forward to the discussions and knowledge.
peace
tom
I noticed there was quite a gap in this thread between 2008-2009 glad to see it picked back up. I have been in this buisness since I was 14y/o I am now 47 you do the math...the number scares me. I have worked in just about every area you can think of in a shop, I caonsider that to be great experience. I have worked in smal Mom&Pop shops, large commercial companies and in-plants (sounds like I can't keep a job). Most of my life has been in California but I now find myself in Colorado working for the University of Colorado. I am a returning member of Printplanet and I am happy to be back. This is a great resource for the exchange of information and I look forward to the discussions and knowledge.
peace
tom
N
nagendran
Guest
Im Nagendran
Im Nagendran
My name is Nagendran. I have worked in prepress for 2 years. I have complected my Diploma In Printing Technology course before 2 years. Now I am working as a graphic engineer in a Multi National packaging concern. I want some technical help from this fourm member. I hope I will get it.
regards
Nagendran
Im Nagendran
My name is Nagendran. I have worked in prepress for 2 years. I have complected my Diploma In Printing Technology course before 2 years. Now I am working as a graphic engineer in a Multi National packaging concern. I want some technical help from this fourm member. I hope I will get it.
regards
Nagendran
Hi, Dear all,
My name is Shelia, and I'm very happy to know you all here.
Now I am working in UCCSOFT,Uccsoft Software Inc. is a provider of products and services related to electronic-publishing technology, particularly variable-data-printing/publishing technology, and on-demand-printing/publishing technology. (www.uccsoft.com )
I feel really happy to be one of UCCSOFT members.
It's a charming team and I think SmartVizor is a great products.
If you have any questions on it, pls tell me and i will try my best to help you.
In my spare time, I like travelling to different places.
and music,books,movies and sports are also my favotite hobbies.
Thank you.
Best Regards!
Shelia
My name is Shelia, and I'm very happy to know you all here.
Now I am working in UCCSOFT,Uccsoft Software Inc. is a provider of products and services related to electronic-publishing technology, particularly variable-data-printing/publishing technology, and on-demand-printing/publishing technology. (www.uccsoft.com )
I feel really happy to be one of UCCSOFT members.
It's a charming team and I think SmartVizor is a great products.
If you have any questions on it, pls tell me and i will try my best to help you.
In my spare time, I like travelling to different places.
and music,books,movies and sports are also my favotite hobbies.
Thank you.
Best Regards!
Shelia
PressWise
|
A 30-day Fix for Managed Chaos
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line. “We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month. Learn how……. |
