Search results

You can even download the drivers, they are for free. I think what you need is proper after-sale-service, nothing more nothing less. I have had a case of a malfunctioning printer that was siting tilted for over a year just because the "specialized service guy" was not able to reset the tilt...

1. Make sure that the roller are set correctly. 2. Make sure that the washup blade is not worn and is set correctly on the oscillating roller 3. Make sure that the washup programm is suitable 4. Make sure that the washup nozzels are not clogged

vinegar and water is for the rubber rollers. Use proper desensitizer for the copper roller.

I think the op manual for every Kompac is the same....I dont have a PDF, I 've got a hard copy for a Hamada. Did you check the Kompack web site?

As far as i can understand, your machine is up n running. Correct me if I'm wrong. If u STILL have the problem with the damp-motors and the ink zones: 1) Check if you can move register on any PU (printing unit). My guess is you can 't. 2) Open all the drive side covers and after that, all the...

Stick with the CD 102, which by the way is a proper "heidelberg" and leave the crapy old QM aside. Crapy electronics/ electrics , poor inking capabilities, only 3 ink forms, very expencive consumables, IR Dryer is an extra, only PRO has front and side lays, high power consumption, old...

Ok, buddy. Ryobi/presstek is your machine then. Dont go near a Heidelberg, i'm dead serious. The only thing you have to consider is the after-sales service. Choose carefully between Ryobi and Presstek, assuming that there are 2 different dealers. Dont let the salesmen talk you into anything, ask...

Why DI, If I may ask?

Dude, the Ryobi and the Presstek presses are EXACTLY the same presses. There is NO difference wharsoever. STAY AWAY from the heidelberg press. Ryobi/Presstek comes in 2 formats , 46 and 52 cm wide. The 52 cm is better in many ways. There is the solution of the Screen DI press, its not waterless...

Get the blankets from the agency. They work just fine.

I 'm sorry to disapoint you, but there was a machine in cyprus with the very same problem. The specialists changed everything except the actual front lay. Servomotors, cables, boards , even replaced the plug pins with golden pins! No luck....And I cannot blame the power supply (engald and cyprus...

If I dont see a picture of this , I dont believe it. I cannot accept that there is a 4color machine out there with no console. That means no remote ink control, no CIP 3, no register control , no automatisations. What kind of a mickey maus machine will that be? Buy a goddamm Gto, Buy anything...

Dude, there is not one Speedmaster 4-color without a console. Heidelberg's weak pointg is the power consumption and the electrics-electronics. Noone can beat the Japs on that. Ryobi has also a better feeder to my taste. Heidelberg is a better equipped press with very good after sales service.

The choice between gravure and flexo is going to be a difficult one. It comes down to small details, such as budget, location, priting quantity, after sales service, staff and prepress capabilities. Stay away from anything waterbased and away from offset. PP and PE dont accept water, so UV is a...

Dont even try to print labels on a sheetfed mashine. It is not worth it. Nowadays, people want their labels printed on a reel , diecutted and creared. The reason is that, labeling machines only work with reels. So what u need is a reel to reel printing machine, Flexo or letterpress (depends on...

1)set the sheet brake speed closer to 100% . That meens tha the sheet brake belt runs at the closer speed as the sheet. 2) set the suction air individually. Open the door panel of the delivery (left hand side)mand reduce or shut off vacuum on the brake modules number 2 and 4 3) remove the belt...

Screw those upload limits! Here is a rapidshare link. Start downloading! RapidShare Webhosting + Webspace

Just in case , here is some more PDF files that you might find handy

For the CD 74 it is code number 91A1 and it's located on the bottom right of the swing door, of the electrical cabinet. The outputs you are looking for are the ones on the SAM17 board (91A94). These PDF files will help you. If you still dont understand, call an electrician.

Dear Albert, it is VERY VERY importand , that you install a pressure regulator, BEFORE the fresh water supply. If the water presure is too high, the stupid ass doser cracks down. If the pressure is too low, the doser doesnt pump additive. The pressure regulator must be adjusted at 3 bar all...